Siemens Comfort Panel repair and refurbishment.
Touchscreen replacement, communication port repair, and component-level diagnostics for Siemens Comfort Panels. No fix no fee.
Comfort Panels repair and refurbishment
Siemens Comfort Panels (TP700 through TP2200) are deployed across pharmaceutical, automotive, water treatment, and food and beverage operations. These panels use LED backlights, eliminating the CCFL failure mode, but touchscreen degradation and communication port failures are now the primary repair drivers as the installed base ages. The semi-modular construction with accessible LVDS and touch ribbon cables supports effective component-level repair.
Common Comfort Panels faults we fix
-
Resistive touchscreen degradation causing dead spots, phantom touches, and calibration drift — the primary failure mode on LED-backlit Comfort Panels
-
Communication port failures affecting PROFINET, MPI/DP, and USB connections from ESD damage or connector wear
-
Power supply faults caused by electrolytic capacitor aging, particularly in continuously powered installations
-
Display artefacts and partial screen blanking from LVDS cable degradation or LCD panel failure on early production units
How it works
-
1
Send details
Share the panel model, fault symptoms, and any photos or error codes.
-
2
Diagnostics
Bench diagnostics isolate the fault and scope the repair.
-
3
Repair, Refurbish & Test
Component-level repair with functional verification before return.
-
4
Return to service
Confirmed results and return logistics for your panel.
Why Electron Lab
- Engineer-led bench diagnostics
- Component-level repair and rework
- Tested Before Return
- Clear, fast quoting
Comfort Panels repair FAQs
Can you replace the touchscreen on a Comfort Panel?
Yes. Siemens Comfort Panels have semi-modular construction with separable front panels and accessible touch ribbon cables. We source aftermarket touchscreen digitizers for the full TP700 to TP2200 range.
Do you repair Siemens Unified Comfort Panels (MTP series)?
The Unified Comfort Panels use bonded capacitive touchscreens, making individual display or touchscreen separation impractical. However, we can often repair other internal faults such as communication or power supply issues. Contact us with your specific fault symptoms and we will advise on repair viability.
My Comfort Panel has lost communication with the PLC — can you repair the port?
Yes. Communication port failures are a common Comfort Panel fault, often caused by ESD damage. We diagnose the port circuitry at board level and carry out the necessary repair or connector replacement.