Cisco IE-2000 industrial switch repair and refurbishment.
PSU repair, boot circuit diagnostics, and board-level repair for the discontinued Cisco IE-2000. No fix no fee.
IE-2000 repair and refurbishment
The Cisco IE-2000 is a discontinued managed Layer 2 industrial Ethernet switch that remains in widespread service across UK manufacturing and process automation networks. Available in 8-port and 16-port configurations with optional PoE, the IE-2000 was a popular choice for machine-level networking. With no new-buy option available, migration to the current IE-3200 or IE-3300 platforms represents a significant investment. Our repair service returns the original unit to service at a fraction of the migration cost.
Common IE-2000 faults we fix
-
Power supply failure — the most common hardware fault, causing complete failure to power on or intermittent restarts
-
Boot faults caused by flash memory failure or power corruption on the boot circuit, preventing the switch from starting up
-
SFP port failure on models with fiber uplink interfaces
-
Relay output failure preventing the switch from signalling fault conditions to the control system
How it works
-
1
Send details
Share the switch model, fault symptoms, and any alarm LEDs or diagnostic output.
-
2
Diagnostics
Bench diagnostics isolate the fault to board, component, or subsystem.
-
3
Repair, Refurbish & Test
Component-level repair with port validation and management system testing before return.
-
4
Return to service
Confirmed test results and return logistics for your switch.
Why Electron Lab
- Engineer-led bench diagnostics
- Component-level repair and rework
- Tested Before Return
- Clear, fast quoting
IE-2000 repair FAQs
Is the Cisco IE-2000 still available new?
No. The IE-2000 is discontinued. Third-party repair is the primary option for keeping these switches in service without migrating to the IE-3200 or IE-3300.
My IE-2000 will not boot — can you repair it?
Yes. Boot failures are commonly caused by flash memory chip failure or power corruption on the boot circuit. We diagnose the hardware fault and carry out the component-level repair.
My IE-2000 has intermittent PoE faults on some ports — is this repairable?
Yes. Intermittent PoE faults are typically caused by the PoE controller or power delivery circuitry. We diagnose at board level and carry out the repair.